1
/
of
5
K&N
K&N Air Filter MINI Cooper S (02-07) 1.6L L4 Petrol 69-2021TP
K&N Air Filter MINI Cooper S (02-07) 1.6L L4 Petrol 69-2021TP
Regular price
£504.99 GBP
Regular price
£505.00 GBP
Sale price
£504.99 GBP
Incl. VAT.
P&P calculated at checkout.
Quantity
Couldn't load pickup availability
Fitments:
(2007) MINI Cooper S 1.6L L4 Petrol Engine Convertible
(2006) MINI Cooper S 1.6L L4 Petrol Engine w/Manual Trans
(02-05) MINI Cooper S 1.6L L4 Petrol Engine All Models
The K&N 69-2021TP Typhoon air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Mini Cooper S and Works models. The restrictive factory air filter and air cleaner assembly are replaced by the K&N Typhoon air intake which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow.
This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engines RPM range. The 69-2021TP air intake comes with a black rubber topped K&N high-flow air filter and a heat shield that installs into the previous upper air cleaner space.
Air is directed through the intake tube into the engines throttle body for a guaranteed power gain. The intake tube has an attractive chrome-like finish that's made to last and it accommodates the factory vent lines. A replacement, matching aluminum air inlet tube is installed into the lower air cleaner to provide better air flow as well. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points.
The tools needed are a couple of screwdrivers, pliers, ratchet set and some wrenches. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake.
Guaranteed to increase horsepower
Designed to improve throttle response and engine sound
Free-flowing aluminum tube
Easy to install, usually in 90 minutes or less
Filter lasts up to 100,000 miles before service is required
Replaces entire factory air intake system
Washable and reusable lifetime air filter
K&N Million Mile Limited Warranty
Part 69-2021TP Product Specifications:
Estimated Horsepower Gain 4.10 HP @ 5997 RPM
Replacement Filter RU-4950
Air Filter Color Red
Air Filter Material Cotton Gauze
Air Filter Outlet Shape Round
Clamps Included 4
Clamp Material Stainless Steel
Clamp Style Regular
Couplers Included 1
System Type Cold-Air Intake System
Product Style 69 Series Typhoon Kits
Air Filter Height 5.5 in (140 mm)
Intake Pipe Color / Finish Polished
Intake Pipe Material Aluminum
CARB EO Number D-269-38
Street Legal In All US States See Application Link Above
TUV Approved (Europe) No
Flange Inside Diameter 2.5 in (64 mm)
Flange Length 2 in (51 mm)
Flange Type Centered
Height 5.5 in (140 mm)
Base Outside Diameter 6 in (152 mm)
Top Outside Diameter 5 in (127 mm)
Top Style X-Stream
Top Material None
Weight 6.9 lb (3.1 kg)
Air Filter Large End Diameter 6 in (152 mm)
Product Box Height 8.5 in (216 mm)
Product Box Length 18.25 in (464 mm)
Product Box Width 14.5 in (368 mm)
Footnote 1 1/4-20 Jack Nut Into Top
Mounting Hardware Included Yes
Horsepower gains based on similar vehicle dynamometer test. Results will vary.
(2007) MINI Cooper S 1.6L L4 Petrol Engine Convertible
(2006) MINI Cooper S 1.6L L4 Petrol Engine w/Manual Trans
(02-05) MINI Cooper S 1.6L L4 Petrol Engine All Models
The K&N 69-2021TP Typhoon air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Mini Cooper S and Works models. The restrictive factory air filter and air cleaner assembly are replaced by the K&N Typhoon air intake which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow.
This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engines RPM range. The 69-2021TP air intake comes with a black rubber topped K&N high-flow air filter and a heat shield that installs into the previous upper air cleaner space.
Air is directed through the intake tube into the engines throttle body for a guaranteed power gain. The intake tube has an attractive chrome-like finish that's made to last and it accommodates the factory vent lines. A replacement, matching aluminum air inlet tube is installed into the lower air cleaner to provide better air flow as well. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points.
The tools needed are a couple of screwdrivers, pliers, ratchet set and some wrenches. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake.
Guaranteed to increase horsepower
Designed to improve throttle response and engine sound
Free-flowing aluminum tube
Easy to install, usually in 90 minutes or less
Filter lasts up to 100,000 miles before service is required
Replaces entire factory air intake system
Washable and reusable lifetime air filter
K&N Million Mile Limited Warranty
Part 69-2021TP Product Specifications:
Estimated Horsepower Gain 4.10 HP @ 5997 RPM
Replacement Filter RU-4950
Air Filter Color Red
Air Filter Material Cotton Gauze
Air Filter Outlet Shape Round
Clamps Included 4
Clamp Material Stainless Steel
Clamp Style Regular
Couplers Included 1
System Type Cold-Air Intake System
Product Style 69 Series Typhoon Kits
Air Filter Height 5.5 in (140 mm)
Intake Pipe Color / Finish Polished
Intake Pipe Material Aluminum
CARB EO Number D-269-38
Street Legal In All US States See Application Link Above
TUV Approved (Europe) No
Flange Inside Diameter 2.5 in (64 mm)
Flange Length 2 in (51 mm)
Flange Type Centered
Height 5.5 in (140 mm)
Base Outside Diameter 6 in (152 mm)
Top Outside Diameter 5 in (127 mm)
Top Style X-Stream
Top Material None
Weight 6.9 lb (3.1 kg)
Air Filter Large End Diameter 6 in (152 mm)
Product Box Height 8.5 in (216 mm)
Product Box Length 18.25 in (464 mm)
Product Box Width 14.5 in (368 mm)
Footnote 1 1/4-20 Jack Nut Into Top
Mounting Hardware Included Yes
Horsepower gains based on similar vehicle dynamometer test. Results will vary.
Share
